Whether you’re a start-up company looking for a prototype or have a patented product, Colorado Hypotube will work with you to produce your product in small quantities or to fill larger orders. Stainless Steel tubing fabrication is our specialty. Contact us to see what we can do for you.
Here at Colorado HypoTube we offer precision grinding of both inside and outside diameter of tubing up to 0.375.”
Our specialized grinders cut almost any angle on tube diameters
producing razor sharp ends.
Grinding, combined with cyclical Electro-Polishing creates a smooth bright finish.
For more information about our Razor-Edge tubing give us a call or send us an email.
303-429-1507
info@coloradohypotube.com
Thank You.
Colorado HypoTube offers precision bending of any material, specializing in stainless steel hypodermic tube of all sizes and lengths. Swaging of ends in exact location along the part and flaring to tight tolerances of tube.
We can create special shapes of any type per your drawings.
We would love to hear how we can help you with your stainless steel HypoTube needs.
303-429-1507
info@coloradohypotube.com
Thank You.
Colorado HypoTube offers services that include tube and wire-forming.
• Precision bending of any material, specializing in stainless hypodermic tube of all sizes.
• Swaging of ends or in exact location along the part.
• Flaring to tight tolerances of tube, all sizes and lengths.
• End closing from full radius to square ends.
• Special shapes of any type per your drawings.
For more information about our tube and wire forming process,
give us a call or email us.
Thank You!
303-429-1507
info@coloradohypotube.com
www.coloradohypotube.com
Here are some details about burr-free cutting at Colorado HypoTube –
Cut to length from 0.010″ to 10′
Accuracy to +/- 0.002″
Straight, square ends
Angle cuts
Rounded ends
Mirror finish
Unique profiles
For more information about our burr-free cutting contact us at:
303-429-1507
info@coloradohypotube.com
We offer Electro-Polishing at Colorado HypoTube:
Electro-Polishing is a process that involves submerging a stainless steel part into a solution of Phosphoric acid and other chemicals while applying an electrical current. Variables include time, temperature and current that interact with the total surface area of the part being treated.
Electro-Polishing can be used to clean, shape or polish stainless steel as required and always leaves the part passivated and free of contaminates.
Variations in current and temperature can be manipulated to round edges, remove burrs or even bring parts to a sharp point. HypoTube can be brought to a razor edge with skillful application of this process.
For more information, feel free to call or email us at:
303-429-1507
info@coloradohypotube.com
Thank you.
Colorado HypoTube, offers Micro-Tube machining.
Slots running longitudinally or radially along tubes or wires.
Holes down to 0.002″ precisely located on the part.
Features of any kind made to your print.
Send us your print so we can discuss how we can help you.
info@coloradohypotube.com
www.coloradohypotube.com
Thank You.
At Colorado HypoTube we perform both Citric & Nitric chemical passivation as defined by ASTM A-380 and ASTM A967 as well at electro-chemical processing of stainless steel tube, wire and parts. These passivation processes are used for cleaning, descaling and sanitation of stainless steel.
Pre-cleaning is an important part of the process. Grease, oils, biologic and chemical contaminants should be removed before the acidic immersion process.
Most jobs at Colorado HypoTube, Inc. are passivated in a Citric solution based
on CitriSurf 22.
Proper agitation and temperature control is also vital to the process. The solution needs to be maintained at the proper temperature and some form of agitation must be applied during the immersion cycle. At Colorado HypoTube we use heated ultrasonic tanks in the passivation process so the parts are assured to have complete, consistent coverage of the solution.
Several thorough rinses in Deionized water leaves a virtual spot-free finish. Parts and tubes and are generally dried at 230°F to assure all surfaces are dry before shipment.
Our daily need for passivation within our own processes means our systems are always at the ready to passivate your parts quickly and efficiently. And that equates to short turnaround times and ultra-competitive prices for all your passivation needs.
303-429-1507
info@coloradohypotube.com
www.coloradohypotube.com
Thank You.
Here are some of the stainless steel surface treatments we offer at Colorado HypoTube:
PASSIVATION
ASTM – A967 Chemical passivation treatment for stainless steel parts
ASTM – A380 Cleaning, descaling and passivation of stainless steel parts
ASTM – B912 Passivation of stainless steel using electro polishing
QQ-P-35C / AMS QQ-P-35A
ELECTRO-POLISHING
Bright, shiny finish
Finish razor edge tube
Cleaning prior to passivation
Surface finish less than 8 RMS
Ultra sharp pointing of wire
PRECISION MICRO-ABRASION
Preparation for over-molding
Visual location marking
Improved finish for adhesion
Surface finish from 30 – 320 Ra
Very tight tolerances can be held on location
For more information, please email us or call us at:
303-429-1507
info@coloradohypotube.com
Thank you.
At Colorado HypoTube, we offer Citric Passivation and Nitric Passivation to the Colorado front range. We passivate stainless steel every day. Overnight service at very competitive prices are available to our clients that are in the Denver front range. If you are in Denver, Arvada, Westminster, Lakewood, Wheat Ridge, Lafayette, Broomfield, Longmont, Aurora or Boulder—areas and need quick quality passivation, let us be your source! We are conveniently located in Westminster, just minutes from Denver or Boulder with great highway access.
We would love to know how we can help you with your Passivation needs.
Thank you!
303-429-1507
info@coloradohypotube.com
Colorado HypoTube 